Overlocker JUKI MO-654D

It is always essential to know your serger before using it otherwise the urge to give up may arise due to simple frustration.

In this blog, we will explain to you step by step how to thread the JUKI MO-654D overlocker.

Threading the JUKI MO-654D

Threading sergers can be complicated the first few times, but by following this tutorial explaining step by step how to thread the JUKI MO-654D, you will handle your machine like no other!

We also offer you an explanatory video for better follow-up threading.

(insert video link)

Step 1: First make sure your serger is unplugged. You are going to place your 4 spools on the spool wedges. Feel free to use the spool colors listed on the machine the first time you use it to help you find your way around better thanks to the color code.

Step 2: Once you have wound the threads in their respective thread guides (phase 1), you will take the blue thread corresponding to the upper looper that you will pass through the s disk ues d and blood pressure n in the following order:

Step 3: Then you will take the red thread corresponding to the lower looper that you will pass through the tension discs in the following order:

Check that the lever is lowered before phases 8 and 9 then raise it for phase 10.

Step 4: Now you are going to take the yellow thread corresponding to the thread of the left sewing needle which you are going to pass through the thread guide in the following order:

Don't forget to pass the yarn through the eye of the needle in phase 8 (the yellow yarn in the left needle).

Step 5: Now you will take the green thread corresponding to the thread of the right sewing needle which you will pass through the thread guide in the following order:

Don't forget to pass the yarn through the eye of the needle in phase 9 (the green yarn in the right needle).

And There you go! You have put on your serger, you can now sew!

Here is the result you will get for the right side and the wrong side of your seam: