Immerse yourself in the world of sewing with the JUKI HZL-53E machine by learning how to optimally prepare the bobbin. Our detailed guide takes you step by step, offering practical advice to get the most out of your sewing machine. Whether you're new to it or experienced, maximize your sewing skills with these essential tips.
JUKI HZL-53E sewing machine
As a beginner, theJUKI HZL-53E sewing machine is the best choice since it is easy to use and offers a variety of stitches.
One of the first things to know how to do is to use a can. A sewing machine bobbin is an essential small spool that unwinds the thread from underneath. It is placed under the needle plate and without it our sewing would not be as strong.
In this blog, we will tell you how to make a bobbin with the JUKI HZL-53E sewing machine.
Making a bobbin with the JUKI HZL-53E
It's not always easy to know how to make a can, but don't panic, it's not complicated! Follow the steps in this tutorial and you will be able to master sewing on your JUKI HZL-53E .
We also offer you an explanatory video to better follow the tutorial.
Step 1: First make sure your sewing machine is plugged in properly then place the original spool containing the thread you want to use on the spool pin.
Step 2: Now you will take the thread that you will pass through the path (phase 2 and 3), then into the small hole of your bobbin (and not the opening of the bobbin) as shown in the images below below.
Step 3: Then you will place the bobbin on its support while holding the thread. Make sure you have tilted the bobbin to the right.
Step 4: From there, you will press (press and hold) on your pedal while still holding the bobbin thread and voilà, your thread wraps itself around your bobbin!
Once you have made your bobbin halfway, cut the thread you were holding then continue while holding your pedal. When you are finished, cut the wire connecting to the spool.
Place the bobbin into the JUKI HZL-53E
Now that you know how to make a bobbin, all you have to do is place it in your sewing machine. It's just as easy as making a can.
The video previously mentioned will also explain how to place it.
Step 1: First, remove the bobbin case cover. Place your bobbin with the end of the free thread that you will pass under the notch as indicated on your machine then replace the cover.
Step 2: Now you will take the thread from your original spool which you will pass through the thread guide of your machine. Afterwards, use the automatic needle threader to pass the thread through the eye of your needle.
Step 3: Then lift your presser foot to pass your thread backwards. Use the handwheel to the right of your machine to collect the bobbin thread using your needle.
There you are, you are ready to start your sewing!
The characteristics of the HZL-53E:
- Sewing speed: max. 750 sti/min
- Stitch length: max. 4mm
- Stitch width: max. 7mm
- Presser foot height: 2 steps max. 9mm
- Needle: HAx1
- Dimensions: 410 (L) * 177 (W) * 308 (H) mm
- Weight: 7.1 kg
We offer several simple tutorials on our blog if you are new to sewing, also find us on Facebook , Instagram and TikTok !