Overlocker JUKI MO-214D
It is always essential to know your serger before using it otherwise the urge to give up may arise due to simple frustration.
In this blog, we will explain step by step how to thread the JUKI MO-214D overlocker.
Threading the JUKI MO-214D
Threading sergers can be complicated the first few times, but by following this tutorial explaining step by step how to thread the JUKI MO-214D, you will handle your machine like no other!
We also offer you an explanatory video for better follow-up threading.
Step 1: First make sure your serger is unplugged. You are going to place your 4 spools on the spool wedges. Feel free to use the spool colors listed on the machine the first time you use it to help you find your way around better thanks to the color code.
Step 2: Once you have passed the threads through their respective thread guide slots, you will take the blue thread corresponding to the upper looper that you will pass through the s disk ues d and blood pressure n in the following order:
Step 3: Then you will take the red thread corresponding to the lower looper that you will pass through the tension discs in the following order:
Check that your lever is lowered then do not forget to raise it in phase 4.
⚠️Make sure that the red wire passes well above the blue wire as in the image below:
Step 4: Now you are going to take the yellow and green threads corresponding to the thread of the sewing needles that you are going to pass through the thread guide, starting first with the yellow thread (left needle) then the green one (needle of right).
Then you will have to pass the threads through the respective needle eyes (phase 4):
And There you go! You have put on your serger, you can now sew!
Here is the result you will get for the right side and the wrong side of your seam:
The features of the JUKI MO-214D overlocker
The Juki MO-214D serger has a wide variety of stitches , making it easy to sew all types of fabrics and create perfect finishing seams !
The serger features LED lighting, built-in rolled hem, waste bin, blindstitch foot and automatic needle threader.
The Juki MO-654D serger is equipped with several settings such as linear thread tensions, differential, cutting width, stitch length. It also has a stitch finger for the rolled hem.
- Sewing speed: max 1500 sti/min
- Number of threads: 2/3/4 overlock
- Stitch length: max 4mm
- Stitch width: left needle 6 mm / right needle 4 mm / rolled edge 2 mm
- Height of the presser foot: 5 / 7.5 mm
- Needle: 130/750H (HAx1) 70-90
- Dimensions: 315(L)*290(W)*290(H)mm
- Weight: 7kg