Comment faire une canette avec la machine à coudre JUKI HZL-53E

table of contents:

JUKI HZL-53E sewing machine

As a beginner, the JUKI HZL-53E sewing machine is the best choice since it is easy to use and offers a variety of stitches.

One of the first things to know is to use a can. A sewing machine bobbin is an essential little spool that unwinds the thread from underneath. It is placed under the needle plate and without it our seam would not be as solid.

In this blog, we will tell you how to make a bobbin with the JUKI HZL-53E sewing machine.

Make a bobbin with the JUKI HZL-53E

It's not always easy to know how to make a can, but don't panic, it's not complicated! Follow the steps in this tutorial and you will be able to master sewing on your JUKI HZL-53E .

We also offer you an explanatory video for a better follow-up of the tutorial.

Step 1: First make sure your sewing machine is plugged in, then place the original spool containing the thread you want to use on the spool pin.

Step 2: Now you will come and take the thread that you will pass through the path (phase 2 and 3), then in the small hole of your bobbin (and not the opening of the bobbin) as shown in the images below -below.

Step 3: Then you will place the bobbin on its support while holding the thread. Make sure you have tipped the bobbin to the right.

Step 4: From there, you will come to press (press and hold) your pedal while still holding the bobbin thread and voila, your thread wraps itself around your bobbin!

Once you have done half of your bobbin, cut the thread you were holding then continue holding your pedal. When you're done, cut the wire connecting to the coil.

Place the bobbin in the JUKI HZL-53E

Now that you know how to make a bobbin, all you have to do is put it in your sewing machine. It's just as easy as making a can.

The previously mentioned video will also explain how to place it.

Step 1: First, remove the bobbin case cover. Place your bobbin with the end of the free thread that you are going to pass under the notch as indicated on your machine then replace the cover.

Step 2: Now you are going to take the thread from your original spool and pass it through the thread guide of your machine. Then, use the automatic needle threader to thread the thread through the eye of your needle.

Step 3: Then lift your presser foot to pull your thread to the back. Use the flywheel to the right of your machine to pick up the bobbin thread with your needle.

There you are, you are ready to start sewing!

The characteristics of the HZL-53E:

  • Sewing speed: max. 750 sti/min
  • Stitch length: max. 4mm
  • Stitch width: max. 7mm
  • Presser foot height: 2 steps max. 9mm
  • Needle: HAx1
  • Dimensions: 410(L)*177(W)*308(H)mm
  • Weight: 7.1kg

We offer you several simple tutorials on our blog if you are new to sewing, find us also on Facebook , Instagram and TikTok !


Leave a comment

All comments are moderated before being published