The zipper is an essential element in sewing, allowing you to open and close a garment or accessory conveniently and discreetly. Depending on the desired style, there are several methods for inserting it, each requiring care and precision.
In this article, we will detail the different techniques for sewing in a zipper according to the desired result.
How do you insert a standard zipper?
Inserting a standard zipper is one of the most common methods in sewing. It is used for skirts, trousers, dresses, and certain jackets and provides a simple, functional finish.
Attach the first side of the zipper.
-
Place the zipper right sides together with one side of the garment.
-
Pin along the teeth to ensure it stays securely in place.
-
Sew by machine, taking care not to be obstructed by the slider. To do this, lower the needle into the fabric, raise the presser foot, move the slider, then continue sewing.
Attach the second side of the zipper.
-
Place the zipper right sides together with the second side of the garment.
-
Pin along the teeth to ensure it stays securely in place.
-
Sew by machine, taking care not to be obstructed by the slider. To do this, lower the needle into the fabric, raise the presser foot, move the slider, then continue sewing.
Topstitch the zipper for better support
Once the zipper has been assembled:
-
Turn the item right side out and press thoroughly to flatten the seam.
-
Topstitch at a distance from the teeth depending on the desired aesthetic effect.
-
Secure the second side of the zipper by repeating the same operation.
How do you insert a zipper with piping?
Piping provides protection and an attractive finish to the zipper. It helps slightly conceal the zipper while maintaining a neat appearance.
Before assembling the zipper:
-
Mark the seam allowance guides to align the pieces correctly.
-
Make sure that the bottom guide corresponds exactly to the end of the zipper.
-
Place the two fabric sides right sides together, removing the pull-tab allowance to avoid excess fabric.
Attach the zipper and create the piping
-
Add 3 mm to the seam allowance on the right side and press to mark the fold.
-
Pin and sew the zipper to this side, using a special zipper presser foot to sew as close as possible to the teeth.
Close the flap and finish the seam
-
Bring the left side over to the right side to partially cover the zipper (by approximately 3 mm).
-
Pin and sew a temporary seam with long stitches to hold the flap in place.
-
Sew a seam parallel to the zipper, then sew at an angle to close the bottom of the zipper opening.
-
Remove the temporary stitching to open the zipper.
What are the tips for successfully inserting a zipper?
To achieve an impeccable finish, here are some good practices to follow:
-
Use a special zipper presser foot to sew as close as possible to the teeth.
-
Mark precise guides before assembling the pieces to prevent any misalignment.
-
Move the slider while sewing to avoid any obstruction during stitching.
-
Gently push back the seam allowance to achieve clean, attractive piping.
-
Take the time to topstitch to ensure secure support and a neat finish.
With these techniques, your zippers will be strong, aligned, and perfectly integrated into your sewing projects.