How to make a rolled hem on the Juki MO-2000 / MO-1000

How to make a rolled hem with the Juki MO-2000QVP / MO-1000 serger?

Thanks to their similar design, tips and tutorials for the Juki MO-2000QVP also apply easily to the MO-1000.

The Juki MO-2000QVP is a high-end serger that makes professional finishes easier, especially the rolled hem stitch. Thanks to its automatic pneumatic threading and interactive LCD screen, this machine is ideal for sewists wanting to achieve fine and elegant hems on lightweight fabrics like chiffon, silk, or voile.

What are the steps to make a rolled hem with the Juki MO-2000QVP / MO-1000?

Prepare the machine

• Turn off the machine and raise the presser foot.
• Install the necessary threads. For a rolled hem, generally use 3 threads: one needle and two loopers.

Remove the looper finger

• Open the looper plate and remove the standard looper finger (or lower the finger depending on the model configuration).
• This reduces the stitch width and creates the rolled hem effect.

Select the rolled hem stitch

• On the Juki MO-2000QVP’s LCD screen, select the program dedicated to the rolled hem stitch.
• The system will show you the optimal settings (tension, length, differential feed, etc.).

Adjust the stitch length

• Reduce the stitch length to about 1 to 1.5 mm for a tight rolled hem.

Adjust the cutting width

• Reduce the cutting width so it fits perfectly to the fabric edge. This helps achieve a fine and even finish, especially if you are working with a Juki flatbed sewing machine, known for its precision and ability to ensure clean seams even on the most delicate fabrics.

Set the thread tensions

• Adjust the tensions according to the machine’s recommendations:
• Needle: slightly reduced
• Upper looper: normal
• Lower looper: slightly increased

Use suitable fabric

• The rolled hem is ideal for fine and lightweight fabrics  .

Position the fabric under the presser foot

• Place the fabric edge flat under the foot.

Sew slowly at first

• Advance gradually to ensure the feed dogs grip the fabric well.
• Watch the stitch consistency.

Check the result

• Inspect the quality of the rolled hem: the fabric edge should be neatly rolled and clean, without puckers or loose threads.

Make adjustments if needed

• Fine-tune the tension or stitch length if the result is not yet perfect.

What are its main features?

• Air threading of loopers: Simplifies threading, reducing setup time.
• Informative LCD screen: Displays optimal settings for each stitch type, including the rolled hem.
• 2/3 thread converter: Allows easy switching from standard stitching to a rolled hem stitch.
• Precise tension adjustment: Ensures a clean and even finish.
• Sewing speed up to 1500 stitches/minute: Ideal for intensive sewing projects.

With the Juki coverstitch machine MO-2000QVP, create flawless rolled hems in just a few simple steps, for professional-quality finishes.

Conclusion: achieve a perfect rolled hem with your Juki MO-2000QVP / MO-1000 serger

The rolled hem stitch is an essential finish to give a professional and elegant touch to your creations in fine fabrics. Thanks to the Juki MO-2000QVP serger, this technique becomes accessible even to beginner sewists, with automatic air threading, an intuitive LCD screen, and assisted settings that simplify every step.

By carefully following this guide, you will quickly master making a flawless rolled hem, whether for scarf hems, delicate garment edges, or refined textile decorations. Feel free to experiment on fabric scraps to perfect your technique and fully benefit from the exceptional performance of the Juki MO-2000QVP.